Specifications for Bituminous Paving Adopted October 14 1915

Cover Specifications for Bituminous Paving Adopted October 14 1915
Specifications for Bituminous Paving Adopted October 14 1915
American Society of Municipal Engineers
The book Specifications for Bituminous Paving Adopted October 14 1915 was written by author Here you can read free online of Specifications for Bituminous Paving Adopted October 14 1915 book, rate and share your impressions in comments. If you don't know what to write, just answer the question: Why is Specifications for Bituminous Paving Adopted October 14 1915 a good or bad book?
Where can I read Specifications for Bituminous Paving Adopted October 14 1915 for free?
In our eReader you can find the full English version of the book. Read Specifications for Bituminous Paving Adopted October 14 1915 Online - link to read the book on full screen. Our eReader also allows you to upload and read Pdf, Txt, ePub and fb2 books. In the Mini eReder on the page below you can quickly view all pages of the book - Read Book Specifications for Bituminous Paving Adopted October 14 1915
What reading level is Specifications for Bituminous Paving Adopted October 14 1915 book?
To quickly assess the difficulty of the text, read a short excerpt:


It shall be free from water as determined by distillation and shall show upon ignition not more than l / 2 per cent of inorganic matter.
No distillate shall be obtained lower than 338 degrees F. , and up to 600 degrees not less than 5 per cent and not more than 20 per cent of distillate shall be obtained. The distillate shall be of a gravity of not less than 1. 03 at 60 degrees F. The residue shall have a melting point of not more than 165 degrees F. In making this distillation an 8-ounce glass
... retort shall be used and the ther- mometer suspended so that before applying the heat the bulb of the thermometer is one-half inch above the surface of the liquid. The melting point of the pitch shall be determined by suspending a l / 2 -inch cube in a beaker of water one inch above the bottom. The temperature shall be raised 9 degrees per minute from 60 degrees F. The temperature recorded the instant the pitch touches the bottom shall be considered the melting point of the pitch. In testing the original materials the initial temperature shall be 40 degrees F.

What to read after Specifications for Bituminous Paving Adopted October 14 1915?
You can find similar books in the "Read Also" column, or choose other free books by American Society of Municipal Engineers to read online
MoreLess
10
Tokens
Specifications for Bituminous Paving Adopted October 14 1915
+Write review

User Reviews:

Write Review:

Guest

Guest